Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Izvedite več.
INDOOR sea cover (46.174)
Na zalogi
Polyethylene sheet to protect boats in marinas. Supplied in 50-m rolls with continuous elastics on the outer sides.Mounting instructions1) unroll the cover from stern to stem keeping central on the boat and leaving a surplus of about 50 cm on either side2) apply two straps 30 cm one from the other and cut the sheet from the roll3) take the elastics out and tie them4) open the cover over the boat5) pull the elastic from one of its ends and tie it to keep it tight6) if necessary, use the special reinforced pre-cuts to connect the outer elastic crosswise.
INDOOR sea cover
Polyethylene sheet to protect boats in marinas. Supplied in 50-m rolls with continuous elastics on the outer sides.Mounting instructions1) unroll the cover from stern to stem keeping central on the boat and leaving a surplus of about 50 cm on either side2) apply two straps 30 cm one from the other and cut the sheet from the roll3) take the elastics out and tie them4) open the cover over the boat5) pull the elastic from one of its ends and tie it to keep it tight6) if necessary, use the special reinforced pre-cuts to connect the outer elastic crosswise.
Napišite vaše lastno mnenje